Standard Force Sensing Resistor

ZWZD-1616 Sensor

High-Reliability Flexible Tactile Force Sensor

Standard off-the-shelf single-point piezoresistive sensor designed for human-touch HMI, squeeze force measurement, and micro-switch replacement.

Active Area

400.0 × 400.0 mm

Force Range

100 g – 15 kg per cell

Outer Dimensions

420.0 × 450.0 mm

Operating Temp

-20°C to +60°C

Engineering Specifications

Complete Technical Specifications for ZWZD-1616

Full mechanical, electrical, and environmental characteristics verified by factory quality inspection.

Model Identifier	ZWZD-1616 Breathable Fabric Seat Sensor
Product Architecture	Flexible Fabric Sensors (Fabric Matrix)
Active Sensing Geometry	400.0 × 400.0 mm
Overall Physical Dimensions	420.0 × 450.0 mm (Thickness: < 1.5 mm (Fabric))
Dynamic Force Sensitivity	100 g – 15 kg per cell
Stand-Off Resistance (Unloaded)	> 5 MΩ
Rise Time Response	< 10 ms (Microsecond Transient)
Hysteresis & Repeatability	Hysteresis: +15% \| Repeatability: ±8%
Operating Temperature Range	-20°C to +60°C
Electrical Termination	Flexible Ribbon Cable (2.54 mm Pitch)

Hardware Integration

Standard analog conditioning topologies for converting variable resistance into calibrated microcontroller inputs.

Connect ZWZD-1616 in series with a 10 kΩ pull-down resistor to an ADC pin. Simplest approach for touch detection and threshold triggering.

Place ZWZD-1616 in the feedback path of an inverting op-amp. Output voltage scales directly linear with force.

Our engineering team provides standard evaluation samples, 2D/3D integration layouts, and 24-hour technical consultation.